Certifications & Audits
Procurement, compliance, and EHS teams use this page to verify the management systems, safety approvals, and intellectual-property registrations that govern GESHINE analyzer manufacturing and field deployment — and to see what we don’t yet claim.
Accredited Management Systems
ISO 9001 / 14001 / 45001 — re-audited on independent cadences.
ISO 9001:2015
质量管理体系认证
Accredited Registrar (IAF / CNAS)
R&D, manufacturing, installation, and after-sales across all product families.
ISO 14001:2015
环境管理体系认证
Accredited Registrar (IAF / CNAS)
Wuhan facility operations, energy use, and environmental impact controls.
ISO 45001:2018
职业健康安全管理体系认证
Accredited Registrar (IAF / CNAS)
Production, commissioning, and on-site service teams.
Enterprise Qualification
National recognition and commercial registration.
National High-Tech Enterprise
国家级高新技术企业
Ministry of Science and Technology (China)
Three-year recognition valid 2024-12-25 through 2027-12-24.
Environmental Protection Product Certificate (CEP)
环境保护产品认证证书
China Environmental United Certification Center (CEC)
Product-level certification for gas analyzer families on emissions duty.
GS1 China Barcode Membership
中国商品条码系统成员证书
GS1 China
Commercial barcode system membership for traceable product shipments.
Safety & Compliance
Explosion-proof, functional safety, and CE-marking evidence package.
CNEX Ex db IIC T6 Gb
防爆合格证
National Supervision and Inspection Center for Explosion Protection and Safety (NEPSI)
Flameproof enclosure rating per GB/T 3836.1 / GB/T 3836.2. Applies to in-situ Ex-proof analyzers.
SIL Functional Safety Certificate
功能安全认证
Third-party functional-safety body
IEC 61508-style assessment; SIL2 capability declared for in-situ analyzer family.
ATEX Directive — Annex I Assessment
ATEX 指令 Annex I 符合性评估
EU ATEX route — assessment in progress
Conditional. In-situ Ex-proof analyzer family; the held explosion-protection certificate today is CNEX Ex db IIC T6 Gb (NEPSI, above). ATEX / IECEx scope is confirmed per certificate and per project — evidence shared on request.
EC-type Verification
EC 型式验证
EU conformity route — per applicable directive
Conditional. Notified-Body examination applies only where the directive requires it (e.g. ATEX / PED); the applicable SKU scope and current status are confirmed per product and per project — certificate evidence shared on request.
LVD + EMC Directive Conformity
低电压 + 电磁兼容 指令符合声明
Manufacturer’s Declaration of Conformity
Low-Voltage Directive (2014/35/EU) and EMC Directive (2014/30/EU) — CE conformity self-declared against harmonized standards; supporting test reports shared on request.
Intellectual Property
Utility-model and design patents plus registered software copyrights.
Utility Model Patent #01
实用新型专利 01
Core detection assembly — details available in the qualification package.
Utility Model Patent #02
实用新型专利 02
Optical path / Herriott cell module — details available in the qualification package.
Utility Model Patent #03
实用新型专利 03
Sample conditioning enclosure — details available in the qualification package.
Industrial Design Patent #01
外观设计专利 01
Analyzer enclosure industrial design — details available in the qualification package.
Software Copyright #01
计算机软件著作权登记 01
Embedded firmware — details available in the qualification package.
Software Copyright #02
计算机软件著作权登记 02
Spectroscopy signal-processing — details available in the qualification package.
Software Copyright #03
计算机软件著作权登记 03
Calibration management suite — details available in the qualification package.
Software Copyright #04
计算机软件著作权登记 04
Remote diagnostics / SCADA bridge — details available in the qualification package.
Software Copyright #05
计算机软件著作权登记 05
CEMS data acquisition — details available in the qualification package.
Software Copyright #06
计算机软件著作权登记 06
Reporting / compliance export — details available in the qualification package.
Software Copyright #07
计算机软件著作权登记 07
Modbus / Profibus protocol stack — details available in the qualification package.
Software Copyright #08
计算机软件著作权登记 08
HMI / operator-console app — details available in the qualification package.
Which certificate matters for whom
Buyers at different points in the evaluation cycle care about different pieces of evidence. This map helps you land on the ones that answer your specific question fastest.
Plant compliance officer
The emissions-monitoring stack is audited by environmental regulators; Ex-proof duty requires zone-rated enclosures, and CEP signals that the analyzer type itself is cleared for the duty.
Procurement & sourcing
Supplier qualification dossiers require active management-system certificates. Tier-1 buyers also expect Scope-1/2 awareness, which ISO 14001 anchors.
Safety & EHS
Hazardous-area installations need a documented safety case — functional-safety assessment, OH&S system, and zone-rated enclosure all feed into it.
Engineering & integration
For CEMS integrators and EPC contractors, CE-mark evidence and functional-safety assessment govern what can be installed in EU-adjacent projects; NHT status signals R&D depth behind the nameplate spec.
How we keep the evidence chain current.
A certificate is a point-in-time instrument; trust is continuous. Four operating habits keep the evidence chain current — so when an auditor asks, the answer is not “let me check.”
- Quality, environmental, and OH&S audits are scheduled on their own cadence — not bundled — so each system gets focused surveillance.
- Incoming-QC, in-process, and FAT records are retained with the serial number, not aggregated into a rolling summary that loses the individual unit.
- Every published claim has a named owner, a source document, a last-verified date, and an expiry date.
- Certificate renewal windows are watched by a named owner; we do not ship analyzers under an expired accreditation.
Honest scope on the evidence chain
Procurement teams reward honesty about what is not yet in place. Three areas where we have decided not to publish until the evidence supports it.
SBTi / Net-Zero targets
Not yet published. A verified target needs Scope-1/2/3 inventory we have not completed; we will publish when targets are auditable.
Product-level carbon footprint
We do not attach unverified PCF numbers to individual analyzers. Analyzer-level LCAs are in scope for future certification cycles.
CBAM / CSRD disclosures
Our products enable customers to measure emissions, but GESHINE itself is not yet inside CBAM / CSRD scope. We will disclose if and when we are.
Need the certificate pack for a specific project?
The qualification package includes certificate numbers, scanned copies, validity windows, and the Ex / SIL scope for the models in your scope.